Procedural Filter Change in Power Steering (VOLVO B7R)

Stepwise procedural filter change in power steering : 

1. Clean round the cap and the dipstick before the cap is removed. 

2. Press down and unscrew the locking device for the filter. 

3. Lift Up the old filter and keep one finger under the filter's centre hole, so that the impurities from inside the filter do not enter the oil reservoir.

4. Transfer the locking device to the new filter and insert it into the oil reservoir.

5. Check that the filter is positioned correctly and is locked in place securely. 

6. 

For oil dipstick in oil container :

• Check the oil level and top up with oil to the MAX marking

For oil dipstick in oil reservoir in vehicles with hydraulically controlled shaft :

• Pull apart the connector to the electrical cable for the oil dipstick
• Check the oil level. With the engine shut off, the level should reach the MAX mark on the dipstick

7. Fit the cover.